Dry Running Tri-Lobe Air Positive Displacement Blower
NX Series: High-Performance Positive Displacement Blower
this range of Positive Displacement Blower offers high performance and reliability for gas or air applications. Choose the perfect blower from a wide range of products.
After many years of building rotary lobe blowers, we've created a new design for bare shaft machines. This design offers:
-
better assembly,
-
long-term reliability,
-
cost-effectiveness,
-
and can easily replace our previous range of blowers (SNH – SNV blowers).
What are the main advantages of NX positive displacement blower between other technologies?
-
Constant Volume Output: They give a steady airflow even when pressure changes, which is good for consistent tasks.
-
Adaptable: They work well in both low-pressure situations and vacuum, so they fit many applications.
-
Energy Efficiency: They are often more energy-efficient than other technologies, especially in applications where a constant volume of air or gas is required without the need for frequent adjustments.
-
Low Maintenance: Positive displacement blower typically has fewer moving parts, leading to lower maintenance requirements and longer service life compared to some other compressor types.
-
Accept Dirty Environments: Many industries use them in dusty or dirty environments without compromising performance.
Share
Type of technology for this positive displacement blower: "roots" type
- Rotors: One-piece three-lobe rotors
- Gears: Helical gears located on the opposite drive side
- High quality mechanical rotary pistons and volumetric efficiency
- Bearings: Four oversized bearings for lifetime reliability
- Oil reservoir: Large oil reservoir for improved bearing lubrication
- Oil thrower: Oil thrower and oil passages for good bearing lubrication and long life
- Seals: Four piston ring seals plus a shoulder by sealing for totally oil free operation
- Shaft seals: Dynamic shaft seals arrangement
- Auto-adjustments of the lateral clearance to improve efficiency in the manufacturing
- Lifetime reliability
- 100% oil free process
- Blower without maintenance for 40,000 hours (except oil each year or every two years if you use HIBON LUBE)
- Exchangeable with the previous range
- Lifting lugs
Range of Applications:
What is this positive Displacement blower used for?
Positive Displacment blower generates a high volume of air or gas flow, making them well-known in the industry. NX series PD blowers can also operate in a vacuum, creating a low-pressure environment.
-
Pneumatic conveying
-
Aeration (WasteWater Treatment)
-
Fluidisation
-
Conveying plastic pellets
-
Filter cleaning
Discover here some specific applications;
How does NX series Positive Displacment Blower work?
NX series positive displacement (PD) blower operates by trapping a specific volume of air or gas in a chamber and then displacing it out through an outlet. Here's a simplified explanation of how it works:
-
Intake Phase: The blower's rotating lobes (rotors) create expanding chambers that draw in air or gas from the surroundings.
-
Discharge Phase: As the lobes or rotors continue to rotate, the trapped air or gas is displaced from the chamber and forced out through an outlet, without undergoing compression within the blower itself.
-
Continuous Cycle: This process repeats continuously as the lobes or rotors rotate, generating a steady volume of air or gas flow.
In summary, NX series positive displacement blower works by trapping and displacing a fixed volume of air or gas per rotation cycle, without internally compressing it.
- Flow: From 100 m3/h to 13,000 m3/h
- Pressure up to 1 bar eff.
- Vacuum up to 500 mbar
Features
Type of technology for this positive displacement blower: "roots" type
- Rotors: One-piece three-lobe rotors
- Gears: Helical gears located on the opposite drive side
- High quality mechanical rotary pistons and volumetric efficiency
- Bearings: Four oversized bearings for lifetime reliability
- Oil reservoir: Large oil reservoir for improved bearing lubrication
- Oil thrower: Oil thrower and oil passages for good bearing lubrication and long life
- Seals: Four piston ring seals plus a shoulder by sealing for totally oil free operation
- Shaft seals: Dynamic shaft seals arrangement
- Auto-adjustments of the lateral clearance to improve efficiency in the manufacturing
- Lifetime reliability
- 100% oil free process
- Blower without maintenance for 40,000 hours (except oil each year or every two years if you use HIBON LUBE)
- Exchangeable with the previous range
- Lifting lugs
Range of Applications:
What is this positive Displacement blower used for?
Positive Displacment blower generates a high volume of air or gas flow, making them well-known in the industry. NX series PD blowers can also operate in a vacuum, creating a low-pressure environment.
-
Pneumatic conveying
-
Aeration (WasteWater Treatment)
-
Fluidisation
-
Conveying plastic pellets
-
Filter cleaning
Discover here some specific applications;
NX Blower Operation
How does NX series Positive Displacment Blower work?
NX series positive displacement (PD) blower operates by trapping a specific volume of air or gas in a chamber and then displacing it out through an outlet. Here's a simplified explanation of how it works:
-
Intake Phase: The blower's rotating lobes (rotors) create expanding chambers that draw in air or gas from the surroundings.
-
Discharge Phase: As the lobes or rotors continue to rotate, the trapped air or gas is displaced from the chamber and forced out through an outlet, without undergoing compression within the blower itself.
-
Continuous Cycle: This process repeats continuously as the lobes or rotors rotate, generating a steady volume of air or gas flow.
In summary, NX series positive displacement blower works by trapping and displacing a fixed volume of air or gas per rotation cycle, without internally compressing it.
Performance
- Flow: From 100 m3/h to 13,000 m3/h
- Pressure up to 1 bar eff.
- Vacuum up to 500 mbar